The WLS type shaftless screw conveyor is used in industries such as building materials, chemical engineering, power, medicine, metallurgy, and food. LS and GX types of screw conveyors are used to transport materials with high grinding and viscosity, and are prone to clumping and entanglement, resulting in material blockage. They are suitable for continuous and uniform transportation of loose, sticky, and easily entangled materials. The temperature of the transported materials can reach up to 400 ℃, and the large inclination angle is less than 20 °.
The main specifications of the product include:WLS215、WLS280、WLS360、WLS420、WLS480、WLS600、WLS800
1、 Characteristics of WLS type shaftless screw conveyor
Compared with traditional axial screw conveyors, axial screw conveyors have the following outstanding advantages due to their use of a design without a central shaft and suspension bearings, and the use of a flexible integral steel screw to push materials:
1. Spiral has strong wear resistance and durability, with a long service life.
2. Strong anti winding ability: without central axis interference, it has special advantages for conveying belt shaped and easily entangled materials, preventing accidents caused by blockage.
3. Good environmental performance: adopting fully enclosed conveying and easy to clean spiral surface can ensure environmental hygiene and the transported materials are not contaminated or leaked.
4. Large torque and low energy consumption: Due to the lack of shaft in the screw and the difficulty of material blockage, it can operate at a lower speed, achieve smooth transmission, and reduce energy consumption.
5. Large conveying capacity: The conveying capacity is 1.5 times that of traditional shaft conveyors with the same diameter, up to 40m ³/ H. The conveying distance is long, up to 25 meters, and it can be installed in a multi-stage series according to user needs. It can transport materials over ultra long distances and work flexibly.
6. Compact structure, space saving, beautiful appearance, easy operation, economical and durable, no maintenance required, low maintenance cost, and 35% electricity saving.
2、 Structure of WLS type screw conveyor
This product mainly consists of a driving device, head assembly, casing, shaftless spiral body, groove liner, feeding port, discharging port, machine cover, base, etc.
1. Drive device: hollow shaft bevel gear reducer or TY coaxial hard tooth surface gear reducer. This manual only provides TY drive device. When designing, the drive device should be set at the discharge port end as much as possible to keep the spiral body in a tensile state during operation.
2. The head is equipped with thrust bearings that can withstand the axial force generated during material transportation.
3. Shell: The shell is U-shaped, with a rainproof cover added to the upper part, and the material is stainless steel or carbon steel.
4. Axis less spiral body: Made of stainless steel or carbon steel.
5. Tank liner: Made of stainless steel or manganese steel.
6. Inlet and outlet: There are two types: square and circular. Generally, the inlet and outlet are installed on-site by the user.
